GT Series, Apartment

Aiphone GT-1A Handsfree Audio Internal Station

Part Number:
AUD033

Trade pricing available via login.

Aiphone, GT-1A Handsfree Audio Internal Station

SKU: AUD033 Category:
Share:

Description

Aiphone GT-1A Handsfree Audio Internal Station

Audio open voice tenant station

Features:

  • Hands-free communication
  • Guard or Concierge call
  • Door release to calling entrance
  • Secondary option button triggers a normally open contact on the back of the unit to trigger external devices.

 

 

Specifications:

  • Communication: Hands-free (VOX) or push-to-talk (simplex)
  • Mounting: Surface 3-gang box wall mount or desk mount using MCW-S/A
    (sold separately)
  • Wire Type: 2-cond., solid non-shielded, PE insulation – use Aiphone #872002

This system is evidently constructed using 2 wires for audio and 2 wires for video and requires minimal work for installation. A maximum of 6 video trunk lines can be used from the video bus controller and audio signal lines use a distribution point from the bus controller. Audio systems can also be confi gured.

 

Troubleshooting (Aiphone GT-1A Handsfree):

If the unit fails to operate normally, check the following points to determine whether the fault can be corrected significantly by the simple measures suggested. If it cannot be corrected, or the fault is not listed in the “Symptom” column, contact your administrator or the system supplier. Symptom Cause Solution The call tone from the entrance station or the door station/doorbell does not sound. The call tone volume is set to “OFF”.

Adjust the call tone volume. Nothing is heard even if the TALK button is pressed. The speaker volume switch is set to “LOW”. Adjust the speaker volume switch during communication. There is no response even if the guard station call/light button is pressed. A guard station is not installed. Contact your administrator. Communication is interrupted, or it becomes a one-way conversation. Loud sounds around this station, entrance station, or door station. Because of auto-voice actuation, audio may be interrupted when a surrounding sound is loud. In that case, press and hold the TALK button to enable the push-to-talk function.

Finally, if the station does not work at all. The power of the system may be for this reason be cut off. Kindly contact your administrator. The Tone off LED is flashing during standby. The Tone off LED flashes at approximately 4 second intervals when the call tone volume switch is set to “OFF”. As a result change the call tone volume level. Doctor call is enabled. Disable the doctor call function.

Reviews

There are no reviews yet.

Be the first to review “Aiphone GT-1A Handsfree Audio Internal Station”

Related products

Need help? Contact Us Now!