Description
Aiphone GT-WLC Lift Control Module
Multi-Relay Control Unit for GT Series Systems
Features:
- Used to call up elevator to specific floor
- Programmable for desired functionality
- 20 relay outputs
- Operating time from 1 second to 600 seconds
Specifications:
- Relay: 20 relay outputs, N/O or N/C dry contact, AC/DC 24V, 0.5A
- Operating Time: 1 second to 600 seconds
- Mounting: Wall mount with included DIN rail
Firstly, this system is constructed using 2 wires for audio and 2 wires for video and requires minimal work for installation.
Secondly, A maximum of 6 video trunk lines can be used from the video bus controller and audio signal lines use a distribution point from the bus controller. Moreover, audio systems can also be configured.
Thirdly, For wiring from the control units to each residence/tenant, GT-4Z wiring method, loop wiring method, or GT-1Z wiring method is possible.
Installation:
Firstly, when the installation of the GT system has finished, configure the link settings among all the stations in the system before using the system by following the steps on the next page.
Secondly, The GT system enables calling and communication among the linked stations only. Furthermore, the settings can be configured by using the GT Setup Tool for Windows, an entrance station, a guard station, or the GT Setup Tool for Android.
Thirdly, the setting method differs depending on the tool or device used
In summary, configure the settings correctly. Moreover, if the settings have not been configured correctly, the system will not function as you planned.
Mounting:
[1] Din rail
[2] Lock release lever Mount GTW-LC to the Din rail. * To remove GTW-LC, pull the lock release lever down. GTW-LC cannot be mounted directly to the wall surface.
Reviews
There are no reviews yet.