Description
Aiphone LE-A, Surface Mount Sub Station
Surface Mount Sub Station, used with LEM or LEF Series
- The LEF is a flexible Open Voice Selective Call Intercom system which integrates any combination of master and sub stations.
- The system features selective calling from any master with handsfree reply, call-in and LED from a variety of sub stations, selective door release (except LEF-3), and a variety of other optional features.
Features:
- Provides internal communication to LEF master stations
- ABS plastic housing
- Push button to call master station(s)
- Hands free communication when master answers
- Desk or wall mount
- Mounts to 1-gang box or ring (wall mount)
Specifications (Aiphone LE-A):
- Type of communication: Open voice hands-free communication
- Mounting: Wall or desk mount
- Wire Type: 3-cond., overall shield – use Aiphone #822203(22AWG) or #821803(18AWG)
- Wire Distance: Sub Station to farthest Master Station: 650′(22AWG) 1,600(18AWG)
- Dimensions: 6-5/16″ H x 5-3/16″ W x 13/16″ D
Common Specifications:
Systems: LEM, LEF, LAF-C
Speaker: 20 ohms
Wiring Distance: 650’ w/22AWG; 1600’ w/18AWG
Dimensions: 6-1/4” x 5-1/8” x 2”
Material: ABS plastic
Color: White with gray nameplate
Mounting (Aiphone LE-A):
1. Remove the operation plate by pressing down on one side and lifting off from the middle. Remove the paper directory card as well, and set aside with operation plate.
2. Loosen the two screws※ in the front case. (Do not remove screws from front case.)
3. Disconnect LEF intercom from the chassis by carefully unplugging the connectors.
4. Mount the back chassis to a single-gang box.
5. Terminate wires on screw terminals inside the chassis.
6. Reconnect intercom with connectors and mount to chassis, tightening the two screws※. Replace the directory card and the operation plate. (Make sure the operation plate is under the small tab at the top when reinstalling.) Peel protective covering off of operation
plate.
※ LEF-3 is one screw.
Reviews
There are no reviews yet.