Wireless Products

Linear, DXT-23 Four Channel Transmitter

Part Number:
RAD830

Trade pricing available via login.

SKU: RAD830 Category: Tag:
Share:

Description

The Model DXS-23 Supervised 3-Button, 4-Channel Handheld Transmitter is a supervised, digitally coded radio transmitter designed for use with Linear’s DX and DXS Format receivers. Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver. To send a complete signal, press the transmitter button for a minimum of 2 seconds. The top button can be hidden with the top button cover supplied.

 

The DXS-23 is a three-button, four-code transmitter. Pressing either of the transmitter’s front buttons sends codes one and two. Pressing the small button on the transmitter’s top sends code three. Pressing both front buttons together sends code four.

 

The digital DXS code format features over a million possible codes. The DXS transmitters are precoded at the factory to unique codes, so no field coding is required and can send a signal for up to 10 seconds per activation.

 

The DXS-23 is supervised for low battery and sends hourly status reports. Some receivers are able to use these signals, others are not. Receivers must be programmed to the transmitter code before system testing and operation. Refer to the receiver’s instructions for details on operation and programming.

 

Each DXS-23 is powered by two self-contained type 2032 3-volt lithium batteries (included). When the batteries voltage gets low, a low battery report is sent with any alarm or status report to notify the receiver. The red LED will blink when the transmitter is activated with low batteries.

 

A removable pocket clip and belt clip are provided for each transmitter. Either can be attached to the back of the transmitter allowing the unit to be clipped to shirt pocket or slid onto a belt.

 

Features

  • Complete RF supervision
  • Alarm, supervisory, and low battery transmissions
  • Unique “Extra” top button
  • High visibility operate LED
  • Two types 2032 lithium batteries supplied
  • Pocket and belt clip supplied
  • DXS format
  • RF frequency: 315 MHz
  • 1.6″ W x 4.2″ H x 0.8″ D

Reviews

There are no reviews yet.

Be the first to review “Linear, DXT-23 Four Channel Transmitter”

Related products

Latest News

Tech Tip: IP Addresses Etc For ZKTeco Door Controllers

How to reconfigure the system to different IP address ranges etc.?

Read more: https://bit.ly/3tvHq5O

#techtips #ZKTeco

The PentaCode dual coding system gives the installer the option to use the classic 12-way dipswitch coding or one of over 17 billion codes.

Includes
• 3 x Pentafob Remotes
• 1 x PCR43301RE Receiver
• Manual

Learn more: https://bit.ly/2Tahrjx

#elsema #fobkit #transmitters

Single Channel Stand-alone Penta Series 433MHz Receiver

• One channel receiver pre wired with relay output
• 12-way dip switch coding or one of over 17 billion encrypted codes.
• Antenna: Elsema ANT 433MHz series

Learn more: https://bit.ly/3dJlw7H

#elsema #1channel

4 Channel Penta Series 433MHz Receiver

• Four channel receiver with relay outputs
• 12-way dip switch coding or one of over 17 billion encrypted codes.
• Compatible with “PentaFOB®” and “PentaCODE®” remotes

Learn more: https://bit.ly/3ku21SY

#elsema #4channel #pentaseries

K2 is a single entry standalone Access Control with integrated keypad and card reader. It is waterproof, suitable for outdoor application.

Learn more: https://bit.ly/3dItxJY

#secukey #proxcard #AccessControl

Load More...