Linear Receivers

RAD810 – DXR-702 Two Channel Receiver

Part Number:
RAD810

Trade pricing available via login.

DXR702 2 Channel Receiver, momentary or latching relay output 12v DC

SKU: RAD810 Category:
Share this product!

Description

The DXR-702 is a two-channel digital receiver with two isolated relay outputs designed for use with Linear’s DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate relay output activates. The relays have four optional output configurations. When the relays are set to latch, the receiver outputs will follow the open/close door status sent from DXT-31 door/window transmitters.

 

In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to activate or control the devices. The receiver should be mounted with the supplied mounting bracket indoors or outdoors inside a weather-resistant non-metallic housing.

 

The digital DX code format features over a million possible codes. The DX transmitters are precoded at the factory to unique codes, so no field coding is required. For versatility, any transmitter can be programmed into any receiver channel. Receivers must be programmed to the transmitter’s code before system testing and operation. Up to 32 transmitters maximum can be programmed into the receiver. The transmitters can be split in any number between the two receiver channels.

 

Receiver channel two is a special channel. If channel two memory is empty, with no transmitters programmed into it, it will report low battery signals from any channel one transmitters capable of sending them. When a low battery transmission is received, the channel two relay will latch, regardless of how the option jumpers are set. The relay will remain engaged until the channel two program button is pressed. The low transmitter batteries should be replaced before resetting the relay.

 

The unit can be powered from an 11-17 VDC or 12-16 VAC power source. The relays’ normally open and normally closed contacts can switch up to 1 amp at 24 volts AC/DC.

 

Cutting jumpers select how the relays activate. Four settings are possible. Both relays will function with the same option. The factory setting causes the relays to engage for four seconds each activation. Optionally, the relays can be set to engage for one second, toggle on with one activation then off with the next, or latch engaged for door status or until reset by pressing the program button.

 

A nine-inch wire whip antenna screws into the receiver’s antenna connector. Optionally, a remote antenna (Model EXA-1000) can be connected to the receiver for greater radio range. The red program indicator lights during RF reception. The installer can verify that signals are being sent from transmitters and diagnose interference problems by viewing the indicator. The indicator also lights during memory programming/erasing and flashes to count the number of transmitters in memory.

 

Features

  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
  • Operates on 11-17 VDC or 12-16 VAC power
  • Two channels
  • Low transmitter battery reporting
  • DX format
  • Two form “C” relay outputs
  • One Amp contact rating @ 24 Volts AC/DC
  • Selectable relay activation time
  • Current consumption: 25 mA standby, 90 mA operating @ 12 VDC
  • RF frequency: 315 MHz
  • 5.5″ W x 4.0″ H x 1.25″ D

Reviews

There are no reviews yet.

Be the first to review “RAD810 – DXR-702 Two Channel Receiver”

Latest News

Lockwood Padde Series ES9000 Pre-Load Electric strike

The ES9000 has been designed to suit the harshest commercial environments, and has the unique feature of the ability to operate with up to 25kg of pre-load pressure on the keeper.

Learn more: https://bit.ly/2ZXgU87

Lockwood Padde Series ES200 Electric Strike

The ES200 series electric strikes are high security products manufactured from stainless steel and designed for use with all access control systems.

Learn more: https://bit.ly/2Eqw2nd
#lockwood #assaabloy #paddeseries #electricstrike

Lockwood Padde Series ES110 Electric Strike

The ES110 is a cost efficient robust electric strike with a solid construction of one-piece cast aluminium body and stainless steel striker.
Learn more: https://bit.ly/2G1oWWJ

#lockwood #paddeseries #electricstrike #ES100 #assaabloy

PRODUCT OVERVIEW
ZKTeco's SpeedFace+ is a series of high performance face, palm, and fingerprint recognition readers that additionally detect if a person has a high body temperature and is wearing a protective mask.

https://www.youtube.com/watch?v=aFttPr6Vj8w

#ZKTeco #speedface #facemaskdetection

DOR210, N205-SC, Chrome Plated Strike

On activation of the strike release the door (power to open). The strike will unlock when power is applied and will remain unlocked until the power is removed.

Learn more: https://bit.ly/3cgkK1a

#Dorcas #electricstrike #electricdoorstrike

Load More...