Linear Transmitters

RAD840 – DXT-25 Eight Channel Trans

Part Number:
RAD840

Trade pricing available via login.

DXT25 4 button Hand Held Transmitter

SKU: RAD840 Category:
Share this product!

Description

The Model DXS-25 Supervised 5-Button, 8-Channel Handheld Transmitter is a supervised, digitally coded radio transmitter designed for use with Linear’s DX and DXS Format receivers. Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver. To send a complete signal, press the transmitter button for a minimum of 2 seconds. The top button can be hidden with the top button cover supplied.

 

The DXS-25 is a five-button, eight-code transmitter. Pressing any of the transmitter’s front buttons sends codes one through four. Holding down the small button on the transmitter’s top together with pushing with any of the front buttons sends codes five through eight.

 

The digital DXS code format features over a million possible codes. The DXS transmitters are precoded at the factory to unique codes, so no field coding is required and can send a signal for up to 10 seconds per activation.

 

The DXS-25 is supervised for low battery and sends hourly status reports. Some receivers are able to use these signals, others are not. Receivers must be programmed to the transmitter code before system testing and operation. Refer to the receiver’s instructions for details on operation and programming.

 

Each DXS-25 is powered by two self-contained type 2032 3-volt lithium batteries (included). When the batteries voltage gets low, a low battery report is sent with any alarm or status report to notify the receiver. The red LED will blink when the transmitter is activated with low batteries.

 

A removable pocket clip and belt clip are provided for each transmitter. Either can be attached to the back of the transmitter allowing the unit to be clipped to shirt pocket or slid onto a belt.

 

Features

  • Complete RF supervision
  • Alarm, supervisory, and low battery transmissions
  • Unique “Extra” top button
  • High visibility operate LED
  • Two type 2032 lithium batteries supplied
  • Pocket and belt clip supplied
  • DXS format
  • RF frequency: 315 MHz
  • 1.6″ W x 4.2″ H x 0.8″ D

Reviews

There are no reviews yet.

Be the first to review “RAD840 – DXT-25 Eight Channel Trans”

Related products

Latest News

Lockwood Padde Series ES9000 Pre-Load Electric strike

The ES9000 has been designed to suit the harshest commercial environments, and has the unique feature of the ability to operate with up to 25kg of pre-load pressure on the keeper.

Learn more: https://bit.ly/2ZXgU87

Lockwood Padde Series ES200 Electric Strike

The ES200 series electric strikes are high security products manufactured from stainless steel and designed for use with all access control systems.

Learn more: https://bit.ly/2Eqw2nd
#lockwood #assaabloy #paddeseries #electricstrike

Lockwood Padde Series ES110 Electric Strike

The ES110 is a cost efficient robust electric strike with a solid construction of one-piece cast aluminium body and stainless steel striker.
Learn more: https://bit.ly/2G1oWWJ

#lockwood #paddeseries #electricstrike #ES100 #assaabloy

PRODUCT OVERVIEW
ZKTeco's SpeedFace+ is a series of high performance face, palm, and fingerprint recognition readers that additionally detect if a person has a high body temperature and is wearing a protective mask.

https://www.youtube.com/watch?v=aFttPr6Vj8w

#ZKTeco #speedface #facemaskdetection

DOR210, N205-SC, Chrome Plated Strike

On activation of the strike release the door (power to open). The strike will unlock when power is applied and will remain unlocked until the power is removed.

Learn more: https://bit.ly/3cgkK1a

#Dorcas #electricstrike #electricdoorstrike

Load More...