Alarm Systems

TAKEX, FS-1000E Ultraviolet Flame Sensor

Part Number:
TAK220
Product Brochure

Trade pricing available via login.

SKU: TAK220 Categories: , Tag:
Share:

Description

The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.

 

Features:

  • high sensitivity ultraviolet flame sensor
  • detachable base unit with snap-in-out sensor design
  • built-in sounder
  • NO/NC relay output
  • adjustable response time
  • battery (2x AA type-3 alkaline) or DC Operation

 

Specifications:

Model FS-1000E
Detection system Ultraviolet rays detection
(detected wave length 180~260nm)
Detection distance 10m (33ft) max. (7cm flame)
Detection angle Approx. 120 degrees (conically)
Detection timer 3 steps changeover by the slide switch
H (0.2 sec), M (1 sec), L (6 sec)
Power supply Type-3 alkaline battery (LR6) x2 (3V) – included
Lithium battery (CR17450E-R-2-CM2) x1 (3V) – optional
External power supply 9V to 30VDC with polarity
Power consumption Standby: 50μA max. (battery) / 5mA (DC)
Alarm: 50mA max. when buzzer sounds
LED (red) LED alarm: blinking every 0.2 sec during off-delay 10 sec
Low battery: light on 0.1 sec every 5 sec.
Buzzer Alarm: intermittent every 0.2 sec during off delay 10 sec
Low battery: sound 0.1 sec every 5 sec.
Volume: 80dB or more 1m (3.3ft) ahead
(silent setting is available by cutting internal jumper line)
Wiring Terminals
Ambient temperature -10°C to +60°C (+14°F to +140°F)
(battery performance may decrease below 0°C and above 40°C
Installation Indoor (ceiling or wall mount)
Weight Approx. 200g (7oz)
Appearance ABS resin (white)
Supplied accessories · Battery case (Type-3): 1pc
· Type-3 alkaline battery (LR6): 2pcs
· Sensor locking screw: 1pc
· Tapping screw: 2pcs

Reviews

There are no reviews yet.

Be the first to review “TAKEX, FS-1000E Ultraviolet Flame Sensor”

Related products

Latest News

The PentaCode dual coding system gives the installer the option to use the classic 12-way dipswitch coding or one of over 17 billion codes.

Includes
• 3 x Pentafob Remotes
• 1 x PCR43301RE Receiver
• Manual

Learn more: https://bit.ly/2Tahrjx

#elsema #fobkit #transmitters

Single Channel Stand-alone Penta Series 433MHz Receiver

• One channel receiver pre wired with relay output
• 12-way dip switch coding or one of over 17 billion encrypted codes.
• Antenna: Elsema ANT 433MHz series

Learn more: https://bit.ly/3dJlw7H

#elsema #1channel

4 Channel Penta Series 433MHz Receiver

• Four channel receiver with relay outputs
• 12-way dip switch coding or one of over 17 billion encrypted codes.
• Compatible with “PentaFOB®” and “PentaCODE®” remotes

Learn more: https://bit.ly/3ku21SY

#elsema #4channel #pentaseries

K2 is a single entry standalone Access Control with integrated keypad and card reader. It is waterproof, suitable for outdoor application.

Learn more: https://bit.ly/3dItxJY

#secukey #proxcard #AccessControl

SK5-X is a universal keypad, can work as standalone keypad, access controller or standard Wiegand output reader. It can read 125KHz EM & HID for Low Frequency and 13.56MHz Mifare for High Frequency tokens, cards and tags.

Learn more: https://bit.ly/3dJeOi1

#secukey

Load More...