Flame Sensors

TAK220 – FS-1000E, TAKEX Ultraviolet Flame sensor

Part Number:
TAK220
Product Brochure

Trade pricing available via login.

TAKEX Ultraviolet Flame sensor, range 10m, with built in sounder

SKU: TAK220 Category:
Share this product!

Description

The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.

 

Features:

  • high sensitivity ultraviolet flame sensor
  • detachable base unit with snap-in-out sensor design
  • built-in sounder
  • NO/NC relay output
  • adjustable response time
  • battery (2x AA type-3 alkaline) or DC Operation

 

Specifications:

Model FS-1000E
Detection system Ultraviolet rays detection
(detected wave length 180~260nm)
Detection distance 10m (33ft) max. (7cm flame)
Detection angle Approx. 120 degrees (conically)
Detection timer 3 steps changeover by slide switch
H (0.2 sec), M (1 sec), L (6 sec)
Power supply Type-3 alkaline battery (LR6) x2 (3V) – included
Lithium battery (CR17450E-R-2-CM2) x1 (3V) – optional
External power supply 9V to 30VDC with polarity
Power consumption Standby: 50μA max. (battery) / 5mA (DC)
Alarm: 50mA max. when buzzer sounds
LED (red) LED alarm: blinking every 0.2 sec during off-delay 10 sec
Low battery: light on 0.1 sec every 5 sec.
Buzzer Alarm: intermittent every 0.2 sec during off delay 10 sec
Low battery: sound 0.1 sec every 5 sec.
Volume: 80dB or more 1m (3.3ft) ahead
(silent setting is available by cutting internal jumper line)
Wiring Terminals
Ambient temperature -10°C to +60°C (+14°F to +140°F)
(battery performance may decrease below 0°C and above 40°C
Installation Indoor (ceiling or wall mount)
Weight Approx. 200g (7oz)
Appearance ABS resin (white)
Supplied accessories · Battery case (Type-3): 1pc
· Type-3 alkaline battery (LR6): 2pcs
· Sensor locking screw: 1pc
· Tapping screw: 2pcs

Reviews

There are no reviews yet.

Be the first to review “TAK220 – FS-1000E, TAKEX Ultraviolet Flame sensor”

Related products

Latest News

DOR210, N205-SC, Chrome Plated Strike

On activation of the strike release the door (power to open). The strike will unlock when power is applied and will remain unlocked until the power is removed.

Learn more: https://bit.ly/3cgkK1a

#Dorcas #electricstrike #electricdoorstrike

DOR190, N201-SC, Chrome Surface Mount Latch

On activation of the strike release the door (power to open). The strike will unlock when power is applied and will remain unlocked until the power is removed.

Learn more: https://bit.ly/3hNpooL

#dorcas #electricstrike

DOR100, 12V AC/DC N/SX Electric Strike

On activation of the strike releases the door and will unlock when power is applied, it will remain unlocked until the power is remove (power to open).

Learn more: https://bit.ly/2RHJ9Dl

#dorcas #electricstrike

AAP-Panic
Emergency Device, Latching Panic Button with Manual Reset

• Standard Flush Box Installation
• Operating Voltage - 12 ~ 24V DC
• Contacts: 2 x Clean N/O & N/C Contacts Rated to 2A @ 30V

Learn more: https://bit.ly/35PxUBa

#aap #emergencydevice #panicbutton

Access Control, Touch & Emergency Egress

AAP-EM is a mechanical egress for access control applications.

Learn more: https://bit.ly/2RBAK4r

#aap #AccessControl #accesscontrolsystem #emergencyegress #doorrelease

Load More...