5MP

UNV, KIT30104S2-4T2TB, KIT 4CH NVR With 4x 3MP Turret Cams

Part Number:
UNIK400
Product Brochure

Trade pricing available via login.

UNV, KIT30104S2-4T2TB, KIT 4CH NVR With 4x 3MP Turret Cams

Share this product!

Description

The UNV KIT30104S2-4T2TB is a kit consisting of a NVR301-04S2-P4 4channel PoE NVR which supports up to 5MP cameras, and 4 of IPC3613LR3-APF28K-F 3MP IP cameras with built in microphone.

 

Specifications:

NVR301-04S2-P4

Video/Audio Input
IP Video Input 4-ch
Network
Incoming Bandwidth 40Mbps
Outgoing Bandwidth 40Mbps
Remote Users 128
Protocols P2P, UPnP, NTP, DHCP, PPPoE
Video/Audio Output
HDMI/VGA Output HDMI: 1920x1080p/60Hz, 1920x1080p/50Hz, 1600×1200/60Hz, 1280×1024/60Hz, 1280×720/60Hz, 1024×768/60Hz
VGA: 1920x1080p/60Hz, 1920x1080p/50Hz, 1600×1200/60Hz, 1280×1024/60Hz, 1280×720/60Hz, 1024×768/60Hz
Recording Resolution 5MP/4MP/3MP/1080p/960p/720p/D1/2CIF/CIF
Synchronous Playback 4-ch
Corridor Mode Screen 3/4
Decoding
Decoding format Ultra 265/H.265/H.264
Liveview/Playback  5MP/4MP/3MP/1080p/960p/720p/D1/2CIF/CIF
Capability 1 x 5MP@30, 2 x 4MP@25, 2 x 3MP@30,4 x 1080p@25, 8 x 960p@25,8 x 720p@30
Hard Disk
SATA 1 SATA interface
Capacity up to 10TB for each disk
Smart
VCA Detection Face detection, Intrusion detection, Cross line detection, Audio detection
External Interface
Network Interface 1 RJ45 10M/100M self-adaptive Ethernet Interface
USB Interface Rear panel: 2 x USB2.0
Supported Standard IEEE 802.3at, IEEE 802.3af
External Interface
Interface 4 independent 100 Mbps PoE network interfaces
Max Power Max 30W for single port
Max 54W in total (13.5W for each)
Supported Standard IEEE 802.3at, IEEE 802.3af
General
Power Supply 48V DC
Power Consumption: ≤10 W (without HDD)
Working Environment -10°C ~ + 55°C (+14°F ~ +131°F), Humidity ≤ 90% RH (non-condensing)
Dimensions (W×D×H) 260mm × 240mm × 46mm (10.2″×9.4″×1.8″)
Weight (without HDD) 1.1kg (2.43 lb)

 

IPC3613LR3-APF28K-F

Sensor 1/2.7″, 3.0 megapixel, progressive scan, CMOS
Lens Lens (mm): 2.8
Detect (m): 50.4
Observe (m): 20.2
Recognize (m): 10.1
Identify (m): 5.0
Angle of view (H) 113.1°
Angle of View (V) 60.6°
Angle of View (O) 139.1°
Shutter Auto/Manual, 1 ~ 1/100000s
Adjustment angle Pan: 0° ~ 360°
Tilt: 0° ~ 80°
Rotate: 0° ~ 360°
Min. Illumination Colour: 0.01Lux (F2.0, AGC ON)
0Lux with IR
Day/Night IR-cut filter with auto switch (ICR)
Digital noise reduction 2D/3D DNR
S/N >52dB
IR Range Up to 30m (98ft) IR range
WDR DWDR
Video
Video Compression Ultra 265, H.265, H.264
H.264 code profile Baseline profile, Main Profile, High Profile
Frame Rate Main Stream: 3MP (2304*1296), Max 20fps; 2MP (1920*1080), Max 30fps;
Sub Stream:4CIF (704*576), Max 20fps;
HLC Supported
BLC Supported
OSD Up to 4 OSDs
Privacy Mask Up to 4 areas
ROI Up to 8 areas
Motion Detection Up to 4 areas
Storage
Edge Storage Micro SD, up to 128 GB
Network Storage ANR
Network
Protocols IPv4, IGMP, ICMP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, UPnP, HTTP
Compatible Integration ONVIF(Profile G, Profile T), API
Interface
Network 10/100M Base-TX Ethernet
Built-in Mic Supported
General
Power DC 12V±25%, PoE (IEEE 802.3af)
Power consumption: Max 4W

Reviews

There are no reviews yet.

Be the first to review “UNV, KIT30104S2-4T2TB, KIT 4CH NVR With 4x 3MP Turret Cams”

Related products

Latest News

The PentaCode dual coding system gives the installer the option to use the classic 12-way dipswitch coding or one of over 17 billion codes.

Includes
• 3 x Pentafob Remotes
• 1 x PCR43301RE Receiver
• Manual

Learn more: https://bit.ly/2Tahrjx

#elsema #fobkit #transmitters

Single Channel Stand-alone Penta Series 433MHz Receiver

• One channel receiver pre wired with relay output
• 12-way dip switch coding or one of over 17 billion encrypted codes.
• Antenna: Elsema ANT 433MHz series

Learn more: https://bit.ly/3dJlw7H

#elsema #1channel

4 Channel Penta Series 433MHz Receiver

• Four channel receiver with relay outputs
• 12-way dip switch coding or one of over 17 billion encrypted codes.
• Compatible with “PentaFOB®” and “PentaCODE®” remotes

Learn more: https://bit.ly/3ku21SY

#elsema #4channel #pentaseries

K2 is a single entry standalone Access Control with integrated keypad and card reader. It is waterproof, suitable for outdoor application.

Learn more: https://bit.ly/3dItxJY

#secukey #proxcard #AccessControl

SK5-X is a universal keypad, can work as standalone keypad, access controller or standard Wiegand output reader. It can read 125KHz EM & HID for Low Frequency and 13.56MHz Mifare for High Frequency tokens, cards and tags.

Learn more: https://bit.ly/3dJeOi1

#secukey

Load More...