Description
TAKEX TXF-125E 100M Outdoor Battery Operated Photo Electric Beam
The TXF-125E and TXF-125DM are battery operated quad photoelectric beam sensors designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations.
With 4 selectable frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 25/50/75/100m zones.
Powered by 3.6V (17Ah) batteries and featuring ±90° horizontal/±20° vertical adjustable optics to cater for the most dynamic of terrains.
Features:
- 4 x Synchronised high power beams
- Four selectable operation ranges 25/50/75/100m
- 4 x Selectable beam channels to prevent crosstalk
- Vivid internal colour aids beam alignment procedure
- ±90° horizontal ±20° vertical adjustable sensor heads
- Environmental monitoring circuit
- IP65 housing
Specifications (TAKEX TXF-125E):
Type |
Quad Beam
|
Detection system |
Near infrared pulsed beam interruption system
(TR-RE 4 beam simultaneous interruption) |
Infrared beam |
Single modulation pulsed beam by LED (near infrared beam light-emitting diode)
|
Detection distance |
Outdoor 330′(100 m) or less
Distance setting: 82′(25m), 165′(50m), 247′(75m), 330′(100m) (4 distances selectable) |
Max. arrival distance |
10 times 3300′(1000m)
|
Response time |
0. 05sec., 0.1sec., 0.25sec., 0.5sec. (4-level changeover)
|
Frequency Selection |
4 Channels
|
Supply voltage |
3.6VDC
Recommended battery: SAFT lithium thionyl chloride battery LS33600 |
Current consumption |
750μA
Transmitter: Approx.430μA (during protection) Receiver: Approx.320μA (during protection) (normal temperature, 3.6VDC) |
Battery Life |
Transmitter: Approx. 5 years
(at normal temperature, with 2 recommended batteries, excluding wireless transmitter) Receiver: Approx. 5 years |
Alarm output |
Dry contact relay output form C
30VDC 0.1A (resistive load) |
Environmental output |
Dry contact relay output form C
30VDC 0.1A (resistive load) |
Low Battery Output |
Dry contact relay (N.C)
30VDC 0.1A (resistive load) |
Tamper output |
Dry contact relay (N.C)
30VDC 0.05A (resistive load) |
Power output |
3.0VDC 50mA MAX
|
LED indicator |
Red LED (Receiver):
ON: when an alarm is initiated ON: when beam is attenuated |
Functions |
Sound check
Monitor jack Upper/lower beam switch Low battery indication Wireless alignment checker connection Battery saving Repeat output Battery sharing |
Adjustment |
Horizontal: ±90°, Vertical: ± 20°
|
Mounting position |
Outdoor, Indoor
|
Weight |
Transmitter: 52.5oz (1500g) (excluding batteries)
Receiver: 54.3oz (1550g) (excluding batteries) |
Appearance |
Cover: PC resin Wine red
Base: ASA resin Black |
Reviews
There are no reviews yet.